0 Items
Basket SubTotal: £0.00 Checkout

Heavy Rate Springs For FOX Shocks

Scout Gregory 14/05/2018 50 Comments
FOX make some of the best dampers on the market, and we really rate their DHX2 coil shock.

Unfortunately due to the shocks design, FOX's own steel springs with heavier spring rates (550lbs, 600lbs & 650lbs) do not fit the shock as they are too long. This has left many heavier riders wondering what to do!

Luckily our titanium springs fit with ease, so you can order the correct spring size and rate for your shock!



Check out our full range of titanium springs here.

Want to know more? Have any questions? Please leave a comment below!
Leave a reply
Optional, for replies
Your Comments
Ryan Rhodes 17/07/2018

Hey I am in a very unique position in which we are looking at getting 4 dhx2 shocks for our baja (one for each corner) in order to get the desired rear frequency we need around 700lbs coils for the 10.5 x 3.5 size. Is that possible? Can we go heavier?

admin 18/07/2018

Hi Ryan Thank you for your comment. We don't produce 700lbs/in rate springs as standard, but can custom produce these for you no problem. If you need a higher spring rate this is also no problem! If you are interested in ordering these, then please email us as sales@ti-springs.com and we will be able to let you know prices. I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Efrem 12/10/2018

Hi im using 2019 fox dhx2 for my yt capra. Im 95 kilos. Do you have 550lbs x2.75? And how does it cost?

admin 12/10/2018

Hi Efrem Thank you for your comment. According to our spring rate calculator you will need to order a 525lbs x 2.75" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Prices are shown on the website. Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Kelvin 03/11/2018

Hi I am using 2017 Intense Tracer and looking Fox DHX2 2019. I am weight at 100kg with gear pls let know the coil type and order method thx a lot

admin 05/11/2018

Hi Kelvin Thank you for your comment. A titanium spring for a FOX DHX2 shock on an Intense Tracer bike is no problem. According to our spring rate calculator, you will need to order a 550lbs x 2.5" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Todd 11/11/2018

I have a 2017 Rotwild R.E1 and am mounting a Rock Shox Vivid R2C. 160-165 pounds rider weight. What spring rate do you recommend? I like a plush ride.

admin 17/11/2018

Hi Todd Thank you for your comment. A titanium spring for a RockShox Vivid R2C shock on your Rotwild R.E1 bike is no problem. Please could you let me know what size shock the bike uses? For example; 241mm x 76mm or 9.5" x 3". I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Hugo 02/12/2018

hello I have shock Fox coil dh2 210 mm, weight 63 kilos. What spring do you recommend?

admin 03/12/2018

Hi Hugo Thank you for your comment. A titanium spring for a FOX DHX2 shock is no problem. Please could you let me know what bike you have? I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Barry Hamilton 14/11/2018

Hi, I currently ride a 2016 Devinci Spartan carbon all mountain bike with a 165mm fox dhx2 rear shock. I have a 550lb sls spring on it and it's too light for what I am doing. I currently weigh 95kilos and wondering what size to spring I would need for my shock, any help would be greatly appreciated. Thanks.

admin 17/11/2018

Hi Barry Thank you for your comment. A titanium spring for a FOX DHX2 shock on your Devinci Spartan Carbon bike is no problem. According to our spring rate calculator you will need to order a 500lbs x 2.5" 35mm ID fitment titanium spring. This is purely a guideline however and does not take into account personal setup preference and riding style, so if your current 550lbs/in rate spring feels too soft, then you may be better off going for a 600lbs/in rate spring when upgrading to titanium. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Lester a 13/10/2018

Hi good day id like to order a spring for 450lbs and 500lbs for fox dhx2 10.5x3.5 Id like to have it shipped in the philippines please send me and instruction on how ro order and how to pay and how much including shipping fee many thanks! This is a life saver for ys fox dhx2 users with a heavy weight lol i hope to hear form you soon.

admin 24/10/2018

Hi Lester Thank you for your comment. A 450lbs x 3.5" 35mm ID fitment titanium spring and 500lbs x 3.5" 35mm ID fitment titanium spring for a FOX DHX2 shock is no problem. Delivery to the Philippines is no problem. Postage and packaging prices are calculated automatically during the checkout process. You will need to Pre Order both these springs, here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Will 22/07/2018

I am looking for a spring for a Specialized Kenevo Comp 2019. I'm around 105kg and am unsure what specification of spring would be best?

admin 28/07/2018

Hi Will Thank you for your comment. A titanium spring for a Specialized Kenevo Comp bike is no problem. Please could you let me know what shock the bike has? I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Alfonso costa 25/05/2018

I need a 650 ti spring 2.5x8.5 cabe creek dB coil sc Is this possible ?

admin 30/05/2018

Hi Alfonso Thank you for your comment. A 650lbs x 2.5" 36.5mm ID fitment titanium spring for a Cane Creek Double Barrel shock is no problem. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Dave Bartie 06/09/2018

I m 65 yrs old 6 4 102 kg. I m about to buy anXL Kenevo comp with Fox Van RC coil shock. Specs tell me it s max weight is 95kg. My body is a bit beaten up due to many 2wheeled activities. So I just want the best suspension for the odd unexpected hit hopefully to survive it Any help you can supply would be much appreciated. My bike and me will be based in New Zealand.

admin 20/09/2018

Hi Dave Thank you for your comment. A titanium spring for a FOX Van RC shock on a Specialized Kenevo bike is no problem. According to our spring rate calculator you will need to order a 750lbs x 2.25" 35mm ID fitment titanium spring. We don't produce 750lbs/in rate springs as standard, but can custom produce one for you no problem. If you are interested in ordering these, then please email us as sales@ti-springs.com and we will be able to let you know prices. I hope this helps. Regards Scout @ Ti-Springs.com

Reply
sören 04/06/2018

hi can you tell me what spring hardness I need for a fox x2 in a lapierre ie frame. I weigh 74 kg

admin 21/06/2018

Hi Soren Thank you for your comment. A titanium spring for a FOX DHX2 shock on a Lapierre frame is no problem. Please could you let me know which model the frame is? I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Melvin 15/05/2018

Hi, Am on sworks enduro,ohlins ttx22 216 57mm Rider weight is 110kg Do u have a ti spring that would fit? Thanks Mel

admin 17/05/2018

Hi Mel Thank you for your comment. A titanium spring for an Ohlins TTX22 shock on your Specialized S-Works Enduro bike is no problem. According to our spring rate calculator you will need to order a 750lbs x 2.25" 36.5mm ID fitment titanium spring. We don't produce spring rates above 650lbs as standard, however we can custom produce one for you. If this is something that interests you, then please drop us an email at sales@ti-springs.com and we can discuss prices. I hope this helps and look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Marijn C. Van der Made 14/11/2018

I have just got myself a Fox DHX2 and very exited to fit to my bike. Im a sizeable man 100 kg and riding a Banshee Rune v2 - my DHX2 is a 8.5" x 2.5" what spring do you recommend??

admin 17/11/2018

Hi Marijn Thank you for your comment. A titanium spring for a FOX DHX2 shock on your Banshee Rune V2 bike is no problem. According to our spring rate calculator you will need to order a 550lbs x 2.5" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Sebastian 12/12/2018

Hi. I have a santa cruz hightower lt with dhx2 and weight aprox 98 kg, which one i need.

admin 17/12/2018

Hi Sebastian A titanium spring for a FOX DHX2 on a Santa Cruz Hightower LT bike is no problem. According to our spring rate calculator, you will need to order a 600lbs x 2.25" 35mm ID fitment titanium spring. We produce this spring as standard, order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Antonio Rox 20/06/2018

I weigh 86kgs. What spring rate should i get?

admin 21/06/2018

Hi Antonio Thank you for your comment. Please could you let me know what bike you have and also what shock you are running? I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply
Matt 29/08/2018

Hi I have a santa cruz Nomad V3 with a fox dhx2 coil shock on the rear, 8.5 x 2.5 . I weigh around 102kg , I think the rear wheel movement is 6.5" and I'm looking for a sag of around 33% .I'm looking for a light weight spring in black, which spring would you recommend and how much ? Cheers

admin 30/08/2018

Hi Matt Thank you for your comment. A black colour titanium spring for a FOX DHX2 shock on your Santa Cruz Nomad V3 bike is no problem. According to our spring rate calculator, you will need to order a 550lbs x 2.5" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs We offer black colour in both an anodised and plastic coated finish. Prices are shown on the website. Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Alex 14/07/2018

Hi could you please tell me what spring will i need to stiffen up, fox dhx5 current spring 550x2.75 on a Nukeproof Scalp , I weight 96kg. Thanks

admin 14/07/2018

Hi Alex Thank you for your comment. A titanium spring for a FOX DHX5.0 shock on a Nukeproof Scalp bike is no problem. According to our spring rate calculator you will need to order a 450lbs x 3" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Thomas 14/06/2018

Hi Ti-springs. My weight is 95 kg. and i ride a SC Nomad V3 with a Fox DHX2 what size spring do i need ?

admin 21/06/2018

Hi Thomas Thank you for your comment. A titanium spring for a FOX DHX2 shock on your Santa Cruz Nomad V3 bike is no problem. I can confirm that you will need to order a 550lbs x 2.5" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Paolo Pachetti 01/09/2018

Hi! I'm looking for the right spring for a Fox DHx2 222x69,8 mounted on a Nicolai G16, using a 30% sag, the wheel travel is 175 mm. and my weight is about 100 kg. Thank you.

admin 03/09/2018

Hi Paolo Thank you for your comment. A titanium spring for a FOX DHX2 shock on a Nicolai G16 bike is no problem. According to our spring rate calculator you will need to order a 500lbs x 2.75" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Frederic Prad 20/07/2018

Hi, I used your calculator and I would need a 613 lbs spring for my DHX2 2.25 stroke. I am 218 lbs with a frame travel of 5.91 inches and a shock stricken of 2.25. Is it available and what would be the cost? Thanks, Frederic

admin 25/07/2018

Hi Frederic Thank you for comment. The closest rate spring we produce as standard to a 613lbs/in rate spring is a 600lbs/in rate spring. We can custom produce you a 625lbs/in rate spring however for an additional cost. If this interests you, then please email us at sales@ti-springs.com for prices. I'm afraid we don't currently have any 600lbs x 2.25" 35mm ID fitment titanium springs in stock, so you will need to Pre Order, here: https://www.ti-springs.com/category/ti-springs Price start from just 100.00 for our standard Grade 5 titanium Ti Spring and 150.00 for our newer, lighter, Beta-C titanium Race Ti Spring. I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Vince Ilan 22/07/2018

Hi are can springs be custom made? I think I want a gold colour titanium one. Also, undo you have titanium coil springs for downhill coil shocks too?

admin 28/07/2018

Hi Vince Thank you for your comment. Yes we can custom produce titanium springs no problem. We offer an anodised gold finish titanium spring as standard. We produce titanium springs for a wide range of shocks, to suit enduro bikes, downhill bikes and more! Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
David 08/11/2018

Hey guys, got a Transition TR11 with a 2018 FOX DHX2. I m 80kgs with gear on, what spring rate should i get? what is the lightest spring option in terms of finishing, plastic coating, anodised? 35mm ID fitment, correct? cheers

admin 17/11/2018

Hi David Thank you for your comment. A titanium spring for a FOX DHX2 shock on your Transition TR11 bike is no problem. According to our spring rate calculator you will need to order a 450lbs x 2.75" 35mm ID fitment titanium spring. Our lightest titanium spring is our Beta-C titanium Race Ti Spring. The finish on the spring makes no difference to the weight of the spring. Order here: https://www.ti-springs.com/category/race-ti-spring Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Michael Felber 05/10/2018

Hi , i have a yt tues 2.0 and a new fox shock dhx2 267 89 . My Weight is 80 kg .Cold you make me an offer for a titanspring with the right rate ans Size so it will fit Perfect for me?

admin 06/10/2018

Hi Michael Thank you for your comment. A titanium spring for a FOX DHX2 shock on your YT Tues 2.0 bike is no problem. According to our spring rate calculator you will need to order a 275lbs x 3.5" 35mm ID fitment titanium spring. Order here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
Julian 02/07/2018

Hi there, Please could I order a ti spring for a DHX2 on a Nomad V4. I m 88kg so probably a 600lb?. Any chance of sending out to me by this Thursday please?. Many thanks Julian

admin 12/07/2018

Hi Julian Thank you for your comment. A titanium spring for a FOX DHX2 shock on a Santa Cruz Nomad V4 bike is no problem. According to our spring rate calculator you will need to order a 550lbs x 2.5" 35mm ID fitment titanium spring. I'm afraid we don't currently have any of these in stock, so you will need to Pre Order one, here: https://www.ti-springs.com/category/ti-springs Please be sure to check out all our other products on the website! I hope this helps. Regards Scout @ Ti-Springs.com

Reply
CLAVEL 04/10/2018

hello, what spring should i take for a DHX2 on a nomad cc with a weight of 71kg ? thank you

admin 06/10/2018

Hi Clavel Thank you for your comment. A titanium spring for a FOX DHX2 shock on a Santa Cruz Nomad CC bike is no problem. Please could you let me know which model year your bike is? I look forward to hearing back from you soon. Regards Scout @ Ti-Springs.com

Reply

Featured Products

Direct Mount Stem Spacer
£10.00
Performance Fork Spring Bearing
£18.74
Performance Shock Eyelet Bushings
£7.50
Performance Shock Spring Bearing
£35.00
RideTi Snapback Cap
£15.00
Team Hoodie
£25.00
Team Issue Ti Bolt Kit
£150.00
Team Sticker Pack
£2.50
Team T-Shirt
£15.00
Ti Bolt Prep
£2.50
Ti Headset Spacers 4 Pk
£15.00
Ti Keyring
£15.00
Ti Offset Shock Mounting Hardware
£35.00
Newsletter
  • Contact Us
    3 Brickfield Cottages, Brickfield Lane, Totland Bay, Isle Of Wight, PO39 0HN, United Kingdom
    +44 (0)7851 752754
    sales@ti-springs.com